I bought a Wensn 30-130 Decibel sound meter off fleabay. I use it to record sound levels in front of my face in flight.

 I first tested my RV-8 after installing a turn down tip, but was also experiencing  severe exhaust leaks from my turbo: 19.7 DBa 

After fixing the leak, I recorded 16.8 DBa

Then I squeezed the turn down tip to a flattened rectangle opening, and replaced the lost area with 1/4" holes, which I bent to face backwards with a Philips screwdriver. a Piccolo Pipe, as it's known. Kind of a cheese grater for sound waves. Next reading: 14.6 DBa

This is still to loud for my worn out ears, so I bought an Aeroturbine 2525 muffler, as described on this forum. I've been collecting 304 stainless pipe bend, ball joints clamps and hangers. I hope to get something cobbled together this weekend.

I have a 2" exhaust pipe from the turbo which discharges aft. The pipe has 2 90 degree bends and exhausts in and parallel to the exit air ramp on the bottom. I plan to use the Ford type exhaust hangers with 3/8" rods.