|
|
Paul, Approx 1 oz per gallon is what is commonly used. My experience with
oil level increase in the sump indicates that slightly less than 1 oz/gallon
may be optimum, but I adhere to 1 oz per gallon as it is simply to remember.
Ed
Ed Anderson
RV-6A N494BW Rotary Powered
Matthews, NC
----- Original Message ----- From: "sqpilot@earthlink" <sqpilot@earthlink.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Saturday, February 28, 2004 7:23 AM
Subject: [FlyRotary] oil to fuel mixture ratio
I'm getting ready to put some fuel into this 13b engine. Somewhere I
saved
previous posts regarding how much oil to mix per gallon of fuel.
Unfortunately, that message is floating around in my computer
somewhere....doing a very good job of hiding. Looking for oil to fuel
ratio. I assume I can just use my 2 cycle oil that is designed for
air-cooled engines? (Same oil as I used in my Rotax powered gyrocopter).
Thanks in advance to all who respond. Paul Conner
>> Homepage: http://www.flyrotary.com/
>> Archive: http://lancaironline.net/lists/flyrotary/List.html
|
|