|
|
Charlie,
Those look pretty nice. From looking at the bung on the right, it
appears they come apart with small allen screws through the top. Is
this correct? $60/ea seems a bit steep though.
There's an outfit in Canada that sells a nice FI bung (See
attachment). Theirs appear to be a bit more robust.
Mark
On 10/24/12, Charlie England <ceengland7@gmail.com> wrote:
I'm gathering parts for my intake manifold, & came across something that
might interest some of us here.
Image
http://www.injectorholder.com/
http://injectorholder.com/content/page.php?4
For more images, google 'doubleday racing injector holders'.
I actually found these on an air-cooled VW forum. As you can see, the
web site is badly neglected, but when I sent him a private message via
the VW forum, he responded within a few hours. They are $60 ea in
aluminum, and a bit more if for some reason you need steel.
Since I'll have a 'dead end' feed to the engine, like Tracy's 20B, the
inclusion of AN-6 fittings was the attention getter for me. Mu intent is
to use them on the secondary intake tubes, with the primaries in the
stock location. I'm so tight I squeak, but in this case, I couldn't come
up with an inexpensive + easy to implement solution for the secondaries.
If anyone's interested, his email address is derek@injectorholder.com
<mailto:derek@injectorholder.com>. I told him I wanted 2 for a rotary
(he's had one other rotary customer), but I didn't mention 'aircraft'.
Charlie
|
|