|
|
----- Original Message -----
From: "Ed Anderson" <eanderson@carolina.rr.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Thursday, January 29, 2004 8:59 AM
Subject: [FlyRotary] Re: oil supply for Ross
Paul,
I tapped into the my aluminum block at the oil filter fitting location
for both my PSRU oil supply as well as my oil pressure sensor. My engine
has 75 psi of pressure at that point (after oil filter - remote mounted
and
oil cooler). So I don't think you have any problem getting sufficient
pressure at that point. Here are a coupld of photos to make it clearer
(recall my engine is Plugs Up)
Ed
Ed Anderson
RV-6A N494BW Rotary Powered
Matthews, NC
Thanks for the info, Ed. Did you install a 0.40 restrictor, or just use
the hose ID as the restrictor? I used some pretty small ID hose. It is made
for a Nitrous Oxide installation. Paul Conner
|
|