Reply-To: <steve@tsisp.com>
From: "Steve Brooks" <steve@tsisp.com>
To: "'Rotary motors in aircraft'" <flyrotary@lancaironline.net>
Subject: RE: [FlyRotary] Re: EC2 MAP Table
Date: Sun, 25 Jan 2004 11:08:57 -0500
Message-ID: <001e01c3e35d$89f1ba50$6400a8c0@WORKGROUP.local>
MIME-Version: 1.0
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Importance: Normal
In-Reply-To: <list-2947993@logan.com>

Perry,
That sounds OK.  My laptop only has USB, but I have a USB-Serial converter.
I think it's COM3 right now, but I may be able to change the port (I hope).
I had to order the RS232 line driver, so it'll be a while before I can try
it live.  I hope that it sheds some light on a couple of rough spots that I
have in running the engine through the power range.


Thanks,
Steve Brooks
Cozy MKIV (building-finishing)
Mazda 13BT


 -----Original Message-----
From: 	Rotary motors in aircraft [mailto:flyrotary@lancaironline.net]  On
Behalf Of Perry Casson
Sent:	Sunday, January 25, 2004 10:37 AM
To:	Rotary motors in aircraft
Subject:	[FlyRotary] Re: EC2 MAP Table

Steve Brooks wrote:

>Perry,
>I download your program, but it doesn't seem to be functional.  I tried to
>look at the settings, such as comm setting, display mode, or even the help,
>but nothing happens.  Am I doing something wrong ?
>
>
>
Hi Steve,

The program is still a work in progress and things like the menus and
spinner controls are not functional.  Hook  the com1: of your laptop to
at powered up EC2 as per instructions and you will see the EC2 data.
That's about all that works right now other than the upload and download
map table buttons and the raw/calibrated values radio buttons and they
only do something when there is a EC2 hooked up to talk to.

Perry

>>  Homepage:  http://www.flyrotary.com/
>>  Archive:   http://lancaironline.net/lists/flyrotary/List.html