Received-SPF: pass
 receiver=logan.com; client-ip=72.52.218.78; envelope-from=bob@bob-white.com
Date: Tue, 18 Aug 2009 20:02:17 -0600
From: Bob White <bob@bob-white.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Subject: Re: [FlyRotary] Re: MAzda oil cooler fitting sizes
Message-Id: <20090818200217.a98894ab.bob@bob-white.com>
In-Reply-To: <list-3817694@logan.com>
References: <list-3817694@logan.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

Could it be JIC?  Here is a JIC10 to 22 MM
http://www.tompkinsind.com/catalog/product.asp?itemid=11774

Bob W.


On Tue, 18 Aug 2009 21:42:36 -0400
"Ed Anderson" <eanderson@carolina.rr.com> wrote:

> Bill, you might try some of the hydraulic fitting websites.  Some specialize
> in off beat adapters.  They call the fittings JCP or JPC (I forget which)
> instead of AN.
> 
> So you might find an M22x1.5 AN10 (or JPC10).
> 
> Ed Anderson
> 
> Rv-6A N494BW Rotary Powered
> 
> Matthews, NC
> 
> eanderson@carolina.rr.com
> 
> http://www.andersonee.com
> 
> http://www.dmack.net/mazda/index.html
> 
> http://www.flyrotary.com/
> 
> http://members.cox.net/rogersda/rotary/configs.htm#N494BW
> 
> http://www.rotaryaviation.com/Rotorhead%20Truth.htm
> 
> -----Original Message-----
> From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On
> Behalf Of Bill Bradburry
> Sent: Tuesday, August 18, 2009 9:41 PM
> To: Rotary motors in aircraft
> Subject: [FlyRotary] Re: MAzda oil cooler fitting sizes
> 
> Ed, Bob,
> Thanks for the quick reply, guys!  I am planning to replace my oil cooler
> and I hoped that my adapters would work..no joy!  The new cooler is M22X1.5
> :>(
> 
> Bill B
> 
> -----Original Message-----
> From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On
> Behalf Of Bob White
> Sent: Tuesday, August 18, 2009 9:20 PM
> To: Rotary motors in aircraft
> Subject: [FlyRotary] Re: MAzda oil cooler fitting sizes
> 
> You beat me to it Ed.  Here's the data from Racing Beat.
> http://www.racingbeat.com/resultset.asp?partnumber=11901
> However, The fittings on the Second Gen oil cooler uses 18 mm threads for
> both fittings. 
> 
> I had a devil of a time finding those washers though.  I ended up re-using
> the ones I had by heating them up red hot and letting them cool slowly.
> 
> Bob W.
> 
> On Tue, 18 Aug 2009 21:00:11 -0400
> "Ed Anderson" <eanderson@carolina.rr.com> wrote:
> 
> > Bill, here they are at MazdaTrix, looks like 16mm for front cover and 
> > 18mm for rear housing
> > 
> >  
> > 
> > 
> > Adapter
> > 
> > Location
> > 
> > Sealing Washer
> > 
> >  
> > 
> >  	 
> > 
> > 11901 <http://www.mazdatrix.com/../getprice.asp?partnum=11901>
> > 
> > Front Cover (all through 92) and 74-85 Oil Cooler, 16mm
> > 
> > 41-6000-9956 
> > <http://www.mazdatrix.com/../getprice.asp?partnum=41-6000-9956>
> > 
> > 
> > Oil Line Fittings
> > 
> >  	 
> > 
> > 11902 <http://www.mazdatrix.com/../getprice.asp?partnum=11902>
> > 
> > Rear Housing of Engine and 93-95 Front Cover, 18mm
> > 
> > (also fits 86-92 Coolers - but only needed if you are making your own 
> > lines)
> > 
> > 41-8000-9956 
> > <http://www.mazdatrix.com/../getprice.asp?partnum=41-8000-9956>
> > 
> > 
> >  	 
> > 
> >  	 
> >  
> > 
> >  
> > 
> >  
> > 
> >  
> > 
> > 
> >  	 
> >  
> > 
> >  
> > 
> >  
> > 
> >  
> > 
> > 
> >  	 
> >  
> > 
> >  
> > 
> >  
> > 
> >  
> > 
> > 	
> > 
> > 
> > 
> > http://www.mazdatrix.com/b6.htm
> > 
> >  
> > 
> >  
> > 
> > Ed Anderson
> > 
> > Rv-6A N494BW Rotary Powered
> > 
> > Matthews, NC
> > 
> > eanderson@carolina.rr.com
> > 
> >  <http://www.andersonee.com> http://www.andersonee.com
> > 
> >  <http://www.dmack.net/mazda/index.html>
> > http://www.dmack.net/mazda/index.html
> > 
> > http://www.flyrotary.com/
> > 
> >  <http://members.cox.net/rogersda/rotary/configs.htm>
> > http://members.cox.net/rogersda/rotary/configs.htm#N494BW
> > 
> > http://www.rotaryaviation.com/Rotorhead%20Truth.htm
> > <http://www.dmack.net/mazda/index.html>
> > 
> >   _____
> > 
> > From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] 
> > On Behalf Of Bill Bradburry
> > Sent: Tuesday, August 18, 2009 8:51 PM
> > To: Rotary motors in aircraft
> > Subject: [FlyRotary] MAzda oil cooler fitting sizes
> > 
> >  
> > 
> >  Does anyone remember the thread size for the oil coolers and/or the 
> > outlet of the block on the 13B?
> > 
> > Seems like it was M22 or M23 and I don't remember the thread per inch 
> > (or per cm??)
> > 
> >  
> > 
> > Bill B
> > 
> > 
> > 
> > __________ Information from ESET NOD32 Antivirus, version of virus 
> > signature database 3267 (20080714) __________
> > 
> > The message was checked by ESET NOD32 Antivirus.
> > 
> > http://www.eset.com
> > 
> > 
> 
> 
> --
> N93BD - Rotary Powered BD-4 - http://www.bob-white.com
> 3.8 Hours Total Time and holding
> Cables for your rotary installation - http://roblinstores.com/
> 
> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub:
> http://mail.lancaironline.net:81/lists/flyrotary/List.html
> 
> 
> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub:
> http://mail.lancaironline.net:81/lists/flyrotary/List.html
> 
> __________ Information from ESET NOD32 Antivirus, version of virus signature
> database 3267 (20080714) __________
> 
> The message was checked by ESET NOD32 Antivirus.
> 
> http://www.eset.com
> 
>  
> 
> __________ Information from ESET NOD32 Antivirus, version of virus signature
> database 3267 (20080714) __________
> 
> The message was checked by ESET NOD32 Antivirus.
> 
> http://www.eset.com
>  
> 
> 
> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/List.html


-- 
N93BD - Rotary Powered BD-4 - http://www.bob-white.com
3.8 Hours Total Time and holding
Cables for your rotary installation - http://roblinstores.com/