Received-SPF: pass
 receiver=logan.com; client-ip=72.52.218.78; envelope-from=bob@bob-white.com
Date: Tue, 24 Mar 2009 23:04:40 -0600
From: Bob White <bob@bob-white.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Subject: Re: [FlyRotary] Re: Question about EC2 Cable Web Page
Message-Id: <20090324230440.c1124278.bob@bob-white.com>
In-Reply-To: <list-3558460@logan.com>
References: <list-3558460@logan.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

Yes,  I've done one for a Subaru.  I will need the cable diagram and
table from your manual.

Bob W.

On Tue, 24 Mar 2009 20:33:19 -0700
"Greg Ward" <gregw@onestopdesign.biz> wrote:

> Hey Bob;
> Are you doing harnesses for the EC3 yet?
> Greg Ward
> Lancair 20B in Progress
> 
> ----- Original Message ----- 
> From: "Bob White" <bob@bob-white.com>
> To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
> Sent: Tuesday, March 24, 2009 7:30 PM
> Subject: [FlyRotary] Re: Question about EC2 Cable Web Page
> 
> 
> > Hi Kelly,
> >
> > Thanks for the heads up on the web site problem.  I have restored the
> > missing page and photos.  You can go directly there at:
> > http://www.roblinphoto.com/cable
> >
> > Bob W.
> >
> >
> >
> > On Tue, 24 Mar 2009 22:53:32 +0000
> > "Kelly Troyer" <keltro@att.net> wrote:
> >
> >>   Bob,
> >>     I went to the EC2 order page and tried to log on to the bottom of the 
> >> page where
> >> it said to visit this products web page and it said it was not found on 
> >> that server........
> >>
> >> --
> >> Kelly Troyer
> >> "Dyke Delta"_13B ROTARY Engine
> >> "RWS"_RD1C/EC2/EM2
> >> "Mistral"_Backplate/Oil Manifold
> >>
> >>
> >>
> >>
> >>
> >> -------------- Original message from Bob White 
> >> <bob@bob-white.com>: -------------- 
> >>
> >>
> >> > Hi Kelly,
> >> >
> >> > What is the webpage link you have? I've probably moved stuff around,
> >> > but if I know where you were pointed I can probably find it. Otherwise
> >> > we may have to think through it again.
> >> >
> >> > Bob
> >> >
> >> > On Tue, 24 Mar 2009 17:27:06 +0000
> >> > "Kelly Troyer" wrote:
> >> >
> >> > > Bob, > Finally going to order cables for my EM2 & EC2.............I 
> >> > > have forgotton
> >> > the info you > gave me about how to determine proper direction that I 
> >> > need to have the cables
> >> > exit from > the 90 degree connector that I need for my EC2 (Large 
> >> > Square Model).......The
> >> > webpage > for the EC2 that I looked at before to determine proper 
> >> > orientation will not
> >> > work for me??
> >> > >
> >> > > Thanks
> >> > > -- 
> >> > > Kelly Troyer
> >> > > "Dyke Delta"_13B ROTARY Engine
> >> > > "RWS"_RD1C/EC2/EM2
> >> > > "Mistral"_Backplate/Oil Manifold
> >> >
> >> >
> >> > -- 
> >> > N93BD - Rotary Powered BD-4 - http://www.bob-white.com
> >> > 3.8 Hours Total Time and holding
> >> > Cables for your rotary installation - http://roblinstores.com/
> >> >
> >> > -- 
> >> > Homepage: http://www.flyrotary.com/
> >> > Archive and UnSub: 
> >> > http://mail.lancaironline.net:81/lists/flyrotary/List.html
> >
> >
> > -- 
> > N93BD - Rotary Powered BD-4 - http://www.bob-white.com
> > 3.8 Hours Total Time and holding
> > Cables for your rotary installation - http://roblinstores.com/
> >
> > --
> > Homepage:  http://www.flyrotary.com/
> > Archive and UnSub: 
> > http://mail.lancaironline.net:81/lists/flyrotary/List.html
> > 
> 
> 
> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/List.html


-- 
N93BD - Rotary Powered BD-4 - http://www.bob-white.com
3.8 Hours Total Time and holding
Cables for your rotary installation - http://roblinstores.com/