|
Hi, fellow rotary enthusiasts.....I'm getting ready
to order a radiator for my 13b powered SQ2000 canard pusher. I talked to
Al Wick, and he has a 160 hp Subaru powered Cozy and is cooling it very well
with a radiator that is 17" x 7.25" x 3" deep. Any idea if that size might
also cool a rotary? How does that seem to compare with two GM evaporator
cores? I was told that if I can increase the height to 8 inches instead of
7.25, they can put two fans on it, as well as the built-in Meziere EWP. I can
work with the additional height of 8 inches. Just don't want to spend
$1100.00 for too small a radiator. If 17x8x3 equates to approximately the same
size as two evaporator cores like Ed Anderson is using, I should be OK. If
anyone can compare the square inches of the two, I would sure appreciate
it. Thanks in advance for any and all efforts and recommendations.
Paul Conner
|