X-Virus-Scanned: clean according to Sophos on Logan.com
Return-Path: <bob.kaufmann@cox.net>
Received: from fed1rmmtao106.cox.net ([68.230.241.40] verified)
  by logan.com (CommuniGate Pro SMTP 5.2.0)
  with ESMTP id 2713671 for flyrotary@lancaironline.net; Sun, 03 Feb 2008 16:42:55 -0500
Received-SPF: none
 receiver=logan.com; client-ip=68.230.241.40; envelope-from=bob.kaufmann@cox.net
Received: from fed1rmimpo01.cox.net ([70.169.32.71])
          by fed1rmmtao106.cox.net
          (InterMail vM.7.08.02.01 201-2186-121-102-20070209) with ESMTP
          id <20080203214214.OFLR1430.fed1rmmtao106.cox.net@fed1rmimpo01.cox.net>
          for <flyrotary@lancaironline.net>; Sun, 3 Feb 2008 16:42:14 -0500
Received: from Left ([68.104.63.91])
	by fed1rmimpo01.cox.net with bizsmtp
	id l9i61Y00Q1y7R1w0000000; Sun, 03 Feb 2008 16:42:06 -0500
From: "bob.kaufmann" <bob.kaufmann@cox.net>
To: "'Rotary motors in aircraft'" <flyrotary@lancaironline.net>
References: <list-2713495@logan.com>
In-Reply-To: <list-2713495@logan.com>
Subject: Low compression rotors
Date: Sun, 3 Feb 2008 13:44:13 -0800
Message-ID: <040f01c866ad$eb05a450$c110ecf0$@kaufmann@cox.net>
MIME-Version: 1.0
Content-Type: text/plain;
	charset="us-ascii"
Content-Transfer-Encoding: 7bit
X-Mailer: Microsoft Office Outlook 12.0
Thread-Index: Achmhk/EAKX37EAdRdW4U7VTuq/f6wAJoiFA
Content-Language: en-us
x-cr-hashedpuzzle: zYs= AZyX Bqu2 BzSM B9t8 B+tK DjeD EkKn Ekvs EvvI GNpV G0kd IAo+ IH+T KlpC L5IN;1;ZgBsAHkAcgBvAHQAYQByAHkAQABsAGEAbgBjAGEAaQByAG8AbgBsAGkAbgBlAC4AbgBlAHQA;Sosha1_v1;7;{42CCA226-6F30-4766-B938-0DF3F617B2C0};YgBvAGIALgBrAGEAdQBmAG0AYQBuAG4AQABjAG8AeAAuAG4AZQB0AA==;Sun, 03 Feb 2008 21:43:25 GMT;TABvAHcAIABjAG8AbQBwAHIAZQBzAHMAaQBvAG4AIAByAG8AdABvAHIAcwA=
x-cr-puzzleid: {42CCA226-6F30-4766-B938-0DF3F617B2C0}

Gang

I have a 20B that I have taken the turbos off and will be using it in an
aircraft, a RV-10.  A friend of mine said that I should use the 9.7
compression rotors instead of the turbo rotors.  What say you all?  

I have pulled the engine off to powder coat the engine mount and if I'm
going to switch rotors, now is the time before I hang the engine again.  I
have the flat plate on milling machine so I could make plates for the 20B if
people wanted.  I think I would be competitive.  I would like to do them in
groups of ten if people are interested.  

Bob K 
Finished except all the parts aren't together yet.