Received-SPF: pass
 receiver=logan.com; client-ip=72.52.218.78; envelope-from=bob@bob-white.com
Date: Thu, 31 Jan 2008 22:21:46 -0700
From: Bob White <bob@bob-white.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Subject: Re: [FlyRotary] Re: 20B Startup
Message-Id: <20080131222146.48a430c5.bob@bob-white.com>
In-Reply-To: <list-2710369@logan.com>
References: <list-2710369@logan.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

I can't think of any good reason for that to happen, or a bad one.
Unless something was wrong with the B computer.  I think the only
difference externally is the intake air sensor.  The MAP tables could be
messed up on B I suppose.  The test modes not working also sort of
points to the computer.  I seem to remember there was a limitation on
the test modes on the 20B because of the staging relay but I've proven
many times that my memory isn't very good.

Bob W.

On Fri, 1 Feb 2008 00:07:08 EST
BMears9413@aol.com wrote:

> much better than expected. Sounded like an airplane instead of a kawasaki  
> 750 with open pipes! I'll try to do a you tube tomorrow. My computer wont handle 
>  it on dial up here at the house. 
> Dies immediately when i switch to computer B though. back to A  and it starts 
> right back up.
> 
> 
> 
> **************Start the year off right.  Easy ways to stay in shape.     
> http://body.aol.com/fitness/winter-exercise?NCID=aolcmp00300000002489
> 


-- 
N93BD - Rotary Powered BD-4 - http://www.bob-white.com
3.8 Hours Total Time and holding
Cables for your rotary installation - http://roblinstores.com/cables/