Mailing List flyrotary@lancaironline.net Message #41326
From: Bob White <bob@bob-white.com>
Subject: Re: [FlyRotary] 20B Startup
Date: Thu, 31 Jan 2008 22:00:25 -0700
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Congratulations Bob!  I'm sure glad to hear it started right up.  How
was the sound level?  As bad as you were expecting, or not so bad at
idle?

Bob W.



On Thu, 31 Jan 2008 23:41:10 EST
BMears9413@aol.com wrote:

Hot Damn!!!! I'm just beside myself!!!!!!  Thought I would just see if  it would fire off. No prop. Didn't expect it to actually run. Ready to shut it  off......Fired up and idled...ran it for about 30 min. Have a 5 min video...stop  after I kill it....nothing but BS after that....just dont know how to stop the  video. Died after I switche dto computer B....tried the coil test and injector  test on B and nothing. Will have to investigate that. But DAMN!!! It sounds  great! course it aint at 6000 rpm yet either. No leaks, starts right up. I  bet I cant sleep tonight!
 
Bob Mears
Supermarine Spitfire
 
Damn...computer wont let me send a file that bid. I'll see if I can figure  out how to do it on a you tube and let everybody know.
 
 



**************Start the year off right.  Easy ways to stay in shape.     http://body.aol.com/fitness/winter-exercise?NCID=aolcmp00300000002489



--
N93BD - Rotary Powered BD-4 - http://www.bob-white.com
3.8 Hours Total Time and holding
Cables for your rotary installation - http://roblinstores.com/cables/
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster