|
Yes, Bob. No question in my mind about that. I
am finding that laying with my back bent backwards over the spar and shoulders
squeeze between control sticks, fuselage sides and console panels is just not as
much fun as it used to be {:>).
I considered moving it, but cables are too short to make
any meaningful difference and I'm just a bit hesitant to start a rewiring
project. Although, I guess I could make an extension cable to plug
into the current EC2 fitting and then move it - but I really don't like
multiple connectors in a line and then the question be comes where to move
it to? I have one of the older, big-box Ec2s.
Well, getting ready for Sun & Fun continues.
Hope to see you down there.
Ed
----- Original Message -----
Sent: Tuesday, April 10, 2007 12:44
AM
Subject: [FlyRotary] Re: Renesis full
power fuel burn / EC2 injector driver change
So you are
saying that we should mount the EC2 some place that is very
accessible?
Bob Perkinson
Hendersonville, TN.
RV9 N658RP
Reserved
If nothing changes
Nothing changes
I would have to unload and take out my seats to
get under the instrument panel and take the EC2 out - never thought about
its location at installation time - thought I would never have it out from
under the panel - boy! was I ever wrong {:>)
Ed
|