|
|
Hi Joe,
Thanks for the reference, but so far I only have the square
connectors. John needs the oval ones. So far I haven't found a source
for the oval connector only. Just for the record, the EFI connectors I
stock are MSD-2400's which are widely available, usually in a pack of 8.
Bob W.
On Fri, 23 Mar 2007 10:14:45 -0400 (EDT)
jewen@comporium.net wrote:
Hi John,
Not sure if the connector you are refering to are correct, but you may
want to try http://www.roblin-photo.com/shop/. This is Bob Whites site,
he sells the bare connector and pins for $2.50 each. Better price and you
can run your Tefzel all the way to the connector, eliminating splices. You may want to check with Bob to confirm fit.
Joe
On Fri, March 23, 2007 9:04 am, John Downing wrote:
> Are the injector connectors, Nippon Denso, that fit the Toyota - Nissan,
> the ones that will work on the 89, 91 Mazda injectors with the oval
> connector? The site showing the connectors is
> www.fiveomotorsport.com/injector CONNECT.asp Thankyou JohnD
--
Homepage: http://www.flyrotary.com/
Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html
--
N93BD - Rotary Powered BD-4 - http://www.bob-white.com
First Flight: 11/23/2006 7:50AM - 3.8 Hours Total Time
Cables for your rotary installation - http://www.roblinphoto.com/shop/
|
|