|
|
Chris, Doug Hebert Racing has the American size, Moroso for $12.00, but not
the small ones. JohnD
----- Original Message ----- From: "Chris Sargent" <rv7rotary@knology.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Friday, March 16, 2007 8:19 PM
Subject: [FlyRotary] Re: pressure caps
John,
This link from Speedwaymotors.com has a 28-32 psi Stant lever cap for $16,
and a Stant Racing cap for $20. These are for the normal "American-car"
size radiator cap opening.
http://www.speedwaymotors.com/m/713_Race-Car-Radiator-Caps.html
I recently purchased a 28-32 psi Stant cap and found its release pressure
was 24 psi. That led me to believe it may be worth investing in the
racing
variety.
Tracy mentioned he sees pressure up to 30 psi. Any comments or
suggestions
Tracy?
Regards,
Chris Sargent
On Fri, 16 Mar 2007 16:48:54 -0500
"John Downing" <downing.j@sbcglobal.net> wrote:
> Al, I looked today and could not locate a pressure cap with more than
16#
capacity. Mazdatrix has caps listed without the pressure. Where is the
source for the higher pressure caps. JohnD
>
> At the moment scratching head on the simplest way to hang
muffler
on rubber mount from tube and fabric airframe. I believe I'll need some
SS
sheet w/fiber frax to ward off becoming a flaming turkey
--
N93BD - Rotary Powered BD-4 - http://www.bob-white.com
First Flight: 11/23/2006 7:50AM - 3.8 Hours Total Time
Cables for your rotary installation - http://www.roblinphoto.com/shop/
--
Homepage: http://www.flyrotary.com/
Archive and UnSub:
http://mail.lancaironline.net:81/lists/flyrotary/List.html
--
Homepage: http://www.flyrotary.com/
Archive and UnSub:
http://mail.lancaironline.net:81/lists/flyrotary/List.html
|
|