Looks nice Dennis.
Opinions vary on the hard line tubing but this particular setup looks OK to
me. I hope that is not the return line going back to the pump
inlet? (never do that) Can't tell what the arrangement is from the
photo alone.
Tracy
----- Original Message -----
Sent: Saturday, February 17, 2007 11:16
AM
Subject: [FlyRotary] Cowling and engine
installation RV 7A
Here is one photo of the pressure regulator and bypass
plumbing showing
the aluminum tubing used - question - is the al.
tubing OK on the
firewall or should I replace it with flexable
line?
Also incluced are pictures of the installed James Rotary cowl
with most
of the painting finished!!
Dennis H.
.JPG)
.JPG)
.JPG)