Mailing List flyrotary@lancaironline.net Message #35508
From: Russell Duffy <rusty@radrotary.com>
Subject: RE: [FlyRotary] Cowling and engine installation RV 7A
Date: Sat, 17 Feb 2007 10:51:08 -0600
To: 'Rotary motors in aircraft' <flyrotary@lancaironline.net>
Message

Here is one photo of the pressure regulator and bypass plumbing showing
the aluminum tubing used - question - is the al. tubing  OK on the
firewall or should I replace it with flexable line?

Hi Dennis,
 
If the regulator is mounted very rigidly (not just to the stainless firewall), I'd say the aluminum line is probably OK.  The key is relative motion of course. 


Also incluced are pictures of the installed James Rotary cowl with most
of the painting finished!!

Absolutely beautiful !!! 

Cheers,
Rusty (RV-8 probably sold)
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster