|
|
In a message dated 10/3/2003 10:20:01 PM Eastern Daylight Time, wschertz@ispwest.com writes:
I continue to have excellent cooling from two evaporator cores whose
> thickness supposedly relegate them to the "hopeless" category for cooling.
> In reality, when I did the BTU heat rejection calculations for my
aircraft
> cruising at 170 MPH TAS burning 7.5 GPH, I found the radiator (evaporator)
> cores have a cooling capacity reserve of 58% above that being used at that
> power setting. This is taking in to account that their extra thickness
does
I have been an advocate of the GM cores for years. I had difficulty cooling a Mazda powered GTPJr car with a large conventional radiator. I added a GM core in the stock water heater connections and the problem was solved. After that I used one for oil cooling on many cars of my own and made them up for others.
Just one of the very few things that works too well and is too cheap to pass up.
Lynn E. Hanover
|
|