|
|
Ed,
How did you make the transition peaces between the cowling and the radiator
cores, what material did you use. I know you told me when we were down at
Charles but I have slept a lot since then,
Bob Perkinson
Hendersonville, TN.
RV9 N658RP Reserved
If nothing changes
Nothing changes
-----Original Message-----
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net]On
Behalf Of Ed Anderson
Sent: Sunday, February 05, 2006 4:26 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: Hose size for the coolant
More than enough, Dennis. I use AN-16 stainless steel braided line, but if
doing it over would simply use good quality radiator hose and replace them
ever 2-3 years.
Ed
----- Original Message -----
From: "Dennis Haverlah" <clouduster@austin.rr.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Sunday, February 05, 2006 5:12 PM
Subject: [FlyRotary] Hose size for the coolant
Ed and others flying
What size coolant lines are adequate? I may go with AN or socketless type
hose and am considering 1 inch ID for the coolant and 1/2 inch for the oil
lines.
Thanks,
Dennis H
RV 7A/Renesis
--
Homepage: http://www.flyrotary.com/
Archive and UnSub: http://mail.lancaironline.net/lists/flyrotary/
--
Homepage: http://www.flyrotary.com/
Archive and UnSub: http://mail.lancaironline.net/lists/flyrotary/
|
|