that is 4" thick 9x9" , its the EV0071.  I would think any core that has the tubes coming out of the same end must be a multipass core.  Those with tubes at opposite ends are most likely candidates  for a single pass core.

 

----- Original Message -----

From: Russell Duffy

To: Rotary motors in aircraft

Sent: Monday, December 19, 2005 12:13 AM

Subject: [FlyRotary] Re: Heat exchangers.

Anybody seen any GM cores that are 4 in thick with 9 inches between tanks? 

 

Hi Monty,

 

For more fun than you can stand, go to-  http://www.frigidair.net/Parts/product_EV.html

 

On the left, you will see all the different makes of cars, and can sift through them to find any particular model.  Toward the center of the page, you can click on "evaporator photo gallery", and pull up a picture, and dimensions of any of the cores you want to look at.  Unfortunately, this isn't quite as easy as it could be, but it will certainly get you through many a sleepless night :-)

 

Cheers,

Rusty (STILL not quite done wiring the single rotor Kolb...) 

 

 

EV 0071.jpg