|
Would somebody out there who is more knowledgeable
than me please educate me on the operation of this pump?
There is a plunger controlled by a stepper motor.
Then there is the thingy that spins. Then there is some other thingy that moves
in and out.
Which thingy does the pumping and which position is
max oil flow. Plunger in (towards the motor) or plunger out (away from the
motor) my plan is to just fix it in the max oil setting and use 2 cycle oil. Or
perhaps use a set screw to adjust it until the oil flow/fuel flow is the same as
you guys running premix. I will be replacing the nylon crap with hard
lines.
Monty
P.S. Thingy is a technical term. If you prefer
substitute dumaflatchie or thingamabob.
|