|
|
I am going to add a mounting plate for the EC-2 disable switches to my
catalog (see link below). For my installation, I had an extra 3 1/8"
mounting hole in the panel. I think it used to be used for the fuel
flow meter. So that's what I built the panel for. There is also an
optional resistor tray that can be used with the panel, or bolted
elswhere to hold the 4 series resistors used with peak and hold
injectors. There will have to be 5 inches of clearance behind the
panel for the resistor tray to fit there.
The panel with switches and as much wiring as I can do is $68. The
resistor tray will be $18, and the 5 ohm 25 W resistors will be $3
each. (You won't need the resistors if you have high impedence
injectors.) I have attached a photo of the prototype. It won't go into the catalog
until I have a picture of the final product, which may be a couple of
weeks. If anyone is interested in one of these, send me an email at
sales@roblinphoto.com
Thanks,
Bob W.
--
http://www.bob-white.com
N93BD - Rotary Powered BD-4 (projected engine start in November)
Custom Cables for your rotary installation -
http://www.roblinphoto.com/shop/
|
|