X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Received: from imf22aec.mail.bellsouth.net ([205.152.59.70] verified) by logan.com (CommuniGate Pro SMTP 5.0c4) with ESMTP id 764915 for flyrotary@lancaironline.net; Fri, 14 Oct 2005 14:33:20 -0400 Received-SPF: pass receiver=logan.com; client-ip=205.152.59.70; envelope-from=atlasyts@bellsouth.net Received: from ibm67aec.bellsouth.net ([68.213.226.209]) by imf22aec.mail.bellsouth.net with ESMTP id <20051014183234.YNMT28829.imf22aec.mail.bellsouth.net@ibm67aec.bellsouth.net> for ; Fri, 14 Oct 2005 14:32:34 -0400 Received: from [192.168.0.103] (really [68.213.226.209]) by ibm67aec.bellsouth.net with ESMTP id <20051014183221.HRYY1915.ibm67aec.bellsouth.net@[192.168.0.103]> for ; Fri, 14 Oct 2005 14:32:21 -0400 Mime-Version: 1.0 (Apple Message framework v734) In-Reply-To: References: Content-Type: multipart/alternative; boundary=Apple-Mail-5-683687275 Message-Id: <08A0DDC5-B9B1-478E-BCC0-104A75FC6A0A@bellsouth.net> From: Bulent Aliev Subject: Re: [FlyRotary] Re: injector size stop. I had both injectors wired (as per schematic) to =20 Date: Fri, 14 Oct 2005 14:32:22 -0400 To: "Rotary motors in aircraft" X-Mailer: Apple Mail (2.734) --Apple-Mail-5-683687275 Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed > > I think you were wise to split your injectors power like that, I > did not do that and in hind sight wish I had for the reason you cited. > However, I don't see how adding a circuit breaker would do that. > Now, if you are leaving even 1 of the CB ON then the EC2 is > receiving power even if the EC2 CB is pulled. As long as either > the primary or secondary injector has power on the line (either of > your injector CB is pushed in) then the EC2 will get this > voltage. Tracy used to have an LED on the program button of the > EC2 and it would light up when the EC2 controller had power - that > is another way I found out about the sneak circuit. If I turned on > an injector toggle the EC2 program button LED would come on even > though its power switch/CB was off. > > So do you get the 6.5volts when both injector CB are pulled? > > Ed > When I turn on the P.injector switch ON, the EM lights up and I get 6.5V Voltage reading and "Low Voltage" warning on the EM2 display. Buly --Apple-Mail-5-683687275 Content-Transfer-Encoding: quoted-printable Content-Type: text/html; charset=ISO-8859-1

I think you were wise to split your injectors power like that, = I did not do that and in hind sight wish I had for the reason you = cited.
However, I don't see how adding a = circuit breaker would do that.=A0 Now, if you are leaving even 1 of the = CB ON then the EC2 is receiving power even if=A0the EC2=A0CB is pulled.=A0= As long as either the primary or secondary injector has power on the = line (either of your injector CB is pushed in) then the EC2 will get = this voltage.=A0=A0 Tracy used to have an LED on the program button of = the EC2 and it would light up when the EC2 controller had power - that = is another way I found out about the sneak circuit.=A0 If I turned on an = injector toggle the EC2 program button LED would come on even though its = power switch/CB was off.
=A0
So do you get the = 6.5volts when both injector CB are pulled?
Ed

When I turn on the = P.injector switch ON, the EM lights up and I get 6.5V Voltage reading = and "Low Voltage" warning on the EM2 = display.

Buly

= --Apple-Mail-5-683687275--