----- Original Message -----
Sent: Tuesday, October 11, 2005 5:10
PM
Subject: [FlyRotary] Re: Help!!
Installing Tracy's apex seals
On 10/11/05, Ed
Anderson <eanderson@carolina.rr.com>
wrote:
Dave,
The instructions I have indicates the triangular part
of the apex seal should be on the side toward the
flywheel (Rear) on both rotors. This means you can put the long piece
in and hold it there with a large rubber band, set the rotor down on its
side housing and then you can put the triangular piece in its slot and then
the springs (small spring first {:>)). Note. Make certain the
small spring goes in as far as you can get it. Also be careful that
the springs don't turn side ways as you put them in the slot.
Thanks Ed. Now I know why Bruce T. says to put the triangular
piece down, at least that keeps it from popping out.
Almost back together now...