|
Ralph
If you are going to remove the thermostat in the Mazda oil cooler you will have to plug the bybass hole or the oil will bypass the cooler.
Georges B.
-------Original Message-------
Date: 08/20/05 17:03:11
Subject: [FlyRotary] Re: Oil Cooler Connections [Thermostat]
In cars the thermostat when cold is closed and the water circulates in the
block for for quicker warm up. It warms up and starts letting the water out
to the radiator. when the whole block is more than (usually 180 degrees) it
stays open. I think having the thermostat in the wrong place would
complicate things and I am not at all convinced that you need one at all.
KISS. I would want more than a few seconds of run time on the engine before
I headed up into the wild blue yonder.
It is also possible to get the thermostat in upside down (what looks right
is not necessarly right) and crack the exhaust manifold at least on a car.
This is not like sitting in your driveway late for work wanting the car to
warm up quickly to beat the clock, this is your life!
Ralph
--
. |