Received-SPF: none
 receiver=logan.com; client-ip=201.225.225.168; envelope-from=rijakits@cwpanama.net
Message-ID: <010101c5a5d9$80d1b340$6e5de0c9@usuarioq3efog0>
From: "rijakits" <rijakits@cwpanama.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
References: <list-676165@logan.com>
Subject: Re: [FlyRotary] Re: Oil Cooler Connections
Date: Sat, 20 Aug 2005 17:49:48 -0500
MIME-Version: 1.0
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Any chance to lay down the cooler and make some ducts (don't forget all the
duct considerations mentioned on the other site!)

Thomas J. (Considering myself a new member of the "Black sheep of the
familiy"- Clan of the OTHER LIST)


----- Original Message ----- 
From: "Bob White" <bob@bob-white.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Saturday, August 20, 2005 4:50 PM
Subject: [FlyRotary] Re: Oil Cooler Connections


> Hi Bob,
>
> I don't know what year it is.  I think Bruce has a pile of them and
> just picked one.  I checked Tracy's oil cooler at Oshkosh, and his has
> the side connections like yours. Then I forgot to ask him about input
> and output.  Having the input and output on the side would have been
> more convenient.
>
> I may have to put a 180 hose fitting on it, cut a hole in the cowl and
> make a bump there.  I'll have to take a closer look next trip to the
> airport.  Thanks.
>
> Bob W.
>
> On Sat, 20 Aug 2005 16:11:48 -0500
> "Bob Perkinson" <bobperk@bellsouth.net> wrote:
>
> > Bob,
> > What year model is the cooler that you have?  Attached are a couple of
> > photos of the cooler that I have.  It came with straight fittings, not
banjo
> > fittings. I am not sure what size the fittings threads are.  I think the
one
> > that I have is from an earlier model but I can't be positive of that.
The
> > diagram that is in the Haynes manual shows a drawing of the oil system
that
> > has a cooler that is the same as in your picture.  It shows the inlet
where
> > you indicate outlet and the outlet where you have the inlet.  If I use
this
> > particular cooler it is my intention to mount it with the Thermostat
facing
> > up.
> >
> > Bob Perkinson
> > Hendersonville, TN.
> > RV9A N658RP Reserved
> > If nothing changes
> > Nothing changes
> >
> >
>
>
> -- 
> http://www.bob-white.com
> N93BD - Rotary Powered BD-4 (real soon)
> Prewired EC2 Cables - http://www.roblinphoto.com/shop/
>
> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub:   http://mail.lancaironline.net/lists/flyrotary/