Mailing List flyrotary@lancaironline.net Message #24003
From: Bob White <bob@bob-white.com>
Subject: Re: [FlyRotary] Re: re-drive question for Tracy
Date: Thu, 16 Jun 2005 14:26:10 -0600
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Hi Georges,

Now that would have been a good idea!  If I see any sign of the seal
comming out I think I will give that a try.

Bob W.

On Thu, 16 Jun 2005 12:05:28 -0700 (Pacific Standard Time)
"Echo Lake Fishing Resort (Georges Boucher)" <echolakeresort@telus.net>
wrote:

Bob
Why not use a washer or aluminum plate screwed secured by 3 screws (drilled
& tap 3 small blind holes into the plate) the sealer & pressure on the
retainer on the outer side of the seal will make a secure & safe
professional repair to your problem.
Georges B.
 
-------Original Message-------
 
From: Rotary motors in aircraft
Date: 06/16/05 11:47:41
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: re-drive question for Tracy
 
Hi Buly,
 
I have a sort of unique situation that wouldn't apply to most anyone
else.  My MM plate (NOT the one supplied by Tracy) has a slight
problem.  The recess for the rear seal was machined a few thousands too
large.  The seal was not a press fit so I agonized over what I was
going to do with it (last year sometime) and finally decided to hold
the seal in place with Proseal.  I don't think there is a lot of
pressure there, and I don't think it would leak too fast if it did come
loose, but I won't know until it happens.  I might be surprised.   If it
were to leak, I would prefer to not be pumping engine oil overboard
risking the engine as well as the redrive.
 
As a side benefit, I suspect the redrive would run cooler if I weren't
pushing hot engine oil thru it.  That should be better for the
redrive.  If I were to do it, there would be an oil reservoir, pump, and
small oil cooler.
 
I might mention that I will have at least 15 hours of ground time on
the engine before even thinking of flying it.
 
Bob W.
 
 
 
 
> > Buly,  do you have a pump that would be suitable for that application?
> >
> > Bob W.
> >
>
> But of course Bob. I have it, just don't understand why are you
complicating
> your life? Trying to solve a problem that does not exist? :)
> Buly
>
>
>
> >>  Homepage:  http://www.flyrotary.com/
> >>  Archive:   http://lancaironline.net/lists/flyrotary/List.html
>
>
 
 
--
http://www.bob-white.com
N93BD - Rotary Powered BD-4 (real soon)
Prewired EC2 Cables - http://www.roblin-photo.com/cable/
 
>>  Homepage:  http://www.flyrotary.com/
>>  Archive:   http://lancaironline.net/lists/flyrotary/List.html
.


--
http://www.bob-white.com
N93BD - Rotary Powered BD-4 (real soon)
Prewired EC2 Cables - http://www.roblin-photo.com/cable/
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster