Received-SPF: none
 receiver=logan.com; client-ip=211.29.133.169; envelope-from=lendich@optusnet.com.au
Message-ID: <005601c57132$c2844900$04f9ecdc@george>
From: "George Lendich" <lendich@optusnet.com.au>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
References: <list-1001662@logan.com>
Subject: Re: [FlyRotary] Re: RX8 CD
Date: Wed, 15 Jun 2005 08:45:27 +1000
MIME-Version: 1.0
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Bill,
Just let me clarify that - the CD doesn't cover the engine internals or
accessories !?

If the above statement is true - it's of no use to me!!

I will try for the Engine overhaul manual!
Hoping to have better luck there!
George ( down under)

> At 01:38 AM 6/14/2005, you wrote:
> >Bill Dube,
> >I and a motor rebuild shop have e-mailed your CD supplier contact with no
> >response - so I'm at a loss to know what to do, any suggestions?
>
>          In that case, I'll email it to you in chunks. How big of an
> attachment can you take?
>
> >
> >Could you look at your CD or motor manual and advise of the seal (type
and
> >part number) for the RX8 , e-shaft, Front pulley bolt flange seal.
> >The RX7 has a bronze seal, but my supplier doesn't have a part number for
> >the seal and feels it could be an 'o' ring.
> >
>
>          I'm not sure if the manual I have lists all of the part numbers.
> It shows everything, but it is a workshop manual, not a parts book.
>
>          I have a (non-CD) book that shows internal engine repair. The CD
> does not go inside the engine.
>
>          Bill Dube'
>
>
> >>  Homepage:  http://www.flyrotary.com/
> >>  Archive:   http://lancaironline.net/lists/flyrotary/List.html
>