Mailing List flyrotary@lancaironline.net Message #23137
From: Dale Rogers <dale.r@cox.net>
Subject: Re: [FlyRotary] Re: LS-1 Coils connector info
Date: Sun, 5 Jun 2005 15:39:55 -0400
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
It was Waytek; now I have to remember where I got the injector connectors (the first set is going into the test cell).

Dale R.

From the archives:

=================== begin ==================================

From:   "Ed Anderson" <eanderson@carolina.rr.com> Date:   2004/06/24 Thu PM 03:33:32 EDT
To:   "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Subject:   [FlyRotary] Re: LS1 Coils and Harness II

Just for every one's information, I found (just received the shipment 30 minutes ago) a source of wiring components for the LS1 Coil  #12558948  harness plug at a much cheaper price.  You do have to assemble the plug and add wire.  But the components for 8 coil plugs comes to less than $28 total (not counting cost of wire) or approx. . $3.50 per plug.  Considerably cheaper than anything else I've found - but you do have to put the plug and wires together.  I personally wanted aircraft quality wire for my ignition system, hence my continued search after I received the wiring harness.  Also, the length of wire in the already made harness was a bit constraining as how far apart you could place the coils.

The plug is identical to the one on the harness and also the AC DELCO plug p/n PT 368, down to the orange color of the weather protector. There are enough numbers flying around to confuse folks, so if you are interested contact me off the list for details.  Not everyone will want to wire their own plugs.

Ed


Ed Anderson
RV-6A N494BW Rotary Powered
Matthews, NC
eanderson@carolina.rr.com

____________________

From:   "Ed Anderson" <eanderson@carolina.rr.com> Date:   2004/06/24 Thu PM 09:30:28 EDT
To:   "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Subject:   [FlyRotary] Re: LS1 Coils and Harness II

Hi Ken

 The vendor is a WAYTEK, Inc.  The plugs are Packard-Delphi Metri-pack 150 series.  If you go to their web site and enter their part numbers (below) it will bring up the item and a page with photos of the items.  The pins were the only thing I did not receive (they are back-ordered) so can't show you any yet.

URL is http://www.waytekwire.com/

Let me know if you have any further questions

Ed

Ed Anderson
RV-6A N494BW Rotary Powered
Matthews, NC


38207 METRI-PACK 150 SERIES 4 PIN (the Plug housing)

39006 PACKARD CABLE SEAL-DARK RED (small red seals that seals the individual wire)

31077 METRI-PACK 150 SERIES (This is the terminals I haven't received yet)

38208 METRI-PACK 150 SERIES 4 PIN (This is a tension reliever and clamp that seals the pins in the housing.

422 PED ALL PURPOSE REMOVAL TOOL (This was a pin removal tool that I though was cheap enough to buy it)


There is a minimum order for all items like around $5.00.  So you end up with something like 51 terminal pins when you only need 16.

Just to repeat, this is for the 2004 Corvette 5.7L 350 CID engine and its LS1 coil that carries AC Delco Part number D580 and GM part number 12558948.

========================= end ==============================




Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster