|
Kelly
Richard told me about it, but the case is only about 1mm thick at that spot, I guess you could weld a plate on the inside.
Georges B.
-------Original Message-------
Date: 06/04/05 18:51:51
Subject: [FlyRotary] Re: Rotary risks
Georges,
According to Richard Sohn the 4 port mechanical oil injection
pump is adaptable to the early covers by using one existing bolt
hole and drilling and threading for the other mount bolt....
--
Kelly Troyer
Dyke Delta/13B/RD1C/EC2
-------------- Original message from "Echo Lake Fishing Resort (Georges Boucher)" <echolakeresort@telus.net>: --------------
|
Dale
There are four problems with the "twin dizzy" cover. One there is no room for the water pump housing (you could go to EWP) Two the CAS are not a direct swap with the distributors (can be overcome). Three the cover mounting bolt position are not the same ( only one & can be fixed) & four if you wand to use oil injection you will need to adapt a 4 port pump, it comes with a 2 port with a different mounting pattern. That is the reason I'm using the double decker CAS conversion.
Georges B.
. |
|