|
|
Buly,
I got it now. I am not sure it will work. I ask Bruce T. once if I could
rotate the stock renesis manifold and his said it would not line up. I
believe the distance between the ports are different. Bruce has my
engine now so I will measure when it get back. Or....can someone else
take the measurement. I do not know how long it will take Bruce to
finish the mods.
Bobby -----Original Message-----
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On
Behalf Of atlasyts@bellsouth.net
Sent: Friday, June 03, 2005 5:34 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: Cast Iron Exhaust Manifold for Renesis
Must be my accent :)
You should be able to reverse (rotate) the manifold end to end, and
mount it so the single square flange be angled slightly up, or down.
Don't make me draw you a picture. I won't do it :) Buly
From: "Bobby J. Hughes" <bhughes@qnsi.net>
Date: 2005/06/03 Fri PM 06:32:11 EDT
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Subject: [FlyRotary] Re: Cast Iron Exhaust Manifold for Renesis
Buly,
"Make it so it can be nounted with the square flange facing up or dowm.".....
You lost me.... Bobby
Homepage: http://www.flyrotary.com/
Archive: http://lancaironline.net/lists/flyrotary/List.html
|
|