Received-SPF: pass
 receiver=logan.com; client-ip=205.152.59.73; envelope-from=atlasyts@bellsouth.net
From: <atlasyts@bellsouth.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Subject: Re: [FlyRotary] Prewired EC2 Cables
Date: Thu, 26 May 2005 7:09:30 -0400
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
Message-Id: <20050526110930.JUCS9550.ibm69aec.bellsouth.net@mail.bellsouth.net>

I think this is a bargain. I had 2 friends working for a week to wire everything on mu CZ.
Buly
> 
> From: Bob White <bob@bob-white.com>
> Date: 2005/05/26 Thu AM 12:27:17 EDT
> To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
> Subject: [FlyRotary] Prewired EC2 Cables
> 
> I'm contemplating offering prewired cables for Tracy's EC2.  I've been
> in the electronics field for over 40 years so soldering and cabling are
> easy for me.  
> 
> I would prewire the 15 and 37 pin connectors to your specified length.
> Other wires would be long enough to be cut off and terminated by you.
> Wires would be tefzel (M22759/16) or better and each wire would be
> clearly marked.  Everything would be done to the specs in Tracy's
> manual.
> 
> Using my installation as a reference, I would make the unterminated
> wires that go under the insturment panel 5 feet long and those going to
> the engine compartment 10 feet long.  Length from the 15 pin
> connector to the 37 pin connector is 36 inches.  Based on that, the cost
> would be $95 but this would be adjusted for different lenght
> requirements. These lengths should leave enough wire for most
> installations.
> 
> Also, for the canard community, I would be willing to cable anything up
> to your specifications, but because of the long runs and sensitivity to
> noise I wouldn't want to gurantee sucess in using the cable.
> 
> Is there any interest in such a service?
> 
> Bob White
> 
> -- 
> http://www.bob-white.com
> N93BD - Rotary Powered BD-4 (real soon)
> 
> >>  Homepage:  http://www.flyrotary.com/
> >>  Archive:   http://lancaironline.net/lists/flyrotary/List.html
>