Received-SPF: none
 receiver=logan.com; client-ip=165.166.0.28; envelope-from=Jewen@Comporium.net
Date: Mon, 09 May 2005 22:21:00 -0400
From: Joe <Jewen@Comporium.net>
Subject: Re: [FlyRotary] Re: center rotor OFF
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Message-id: <007101c55506$e94c3ea0$6532a8c0@engineer1>
MIME-version: 1.0
Content-type: text/plain; charset=iso-8859-1
Content-transfer-encoding: 7bit
References: <list-938035@logan.com>

Not so sure you would get everything back.  As the air is compressed it
heats, if the heat is greater than the surrounding walls and rotor some of
the heat (energy) will transfer out of the air charge.  Leaving the charge
with less energy than was put into it.
Joe

----- Original Message ----- 
From: "Ernest Christley" <echristley@nc.rr.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Monday, May 09, 2005 6:16 PM
Subject: [FlyRotary] Re: center rotor OFF


> Russell Duffy wrote:
>
> >
> > OK, make me look it up :-)  Apparently, they stop the valves from
> > opening, rather than leaving them open.  I couldn't find anything that
> > gave details of exactly what point in the sequence they stop the
> > valves, so the cylinder could either be full of air (silly and
> > wasteful of power), empty of air (would cause vacuum that would be as
> > bad as the compression force), or perhaps somewhere in between.
>
>
> Other than friction losses, you'll get back everything you put into
> compressing the gas in the cylinder, Rusty.  The process will be totally
> elastic.
>
> -- 
> This is by far the hardest lesson about freedom. It goes against
> instinct, and morality, to just sit back and watch people make
> mistakes. We want to help them, which means control them and their
> decisions, but in doing so we actually hurt them (and ourselves)."
>
>
> >>  Homepage:  http://www.flyrotary.com/
> >>  Archive:   http://lancaironline.net/lists/flyrotary/List.html