flyrotary@lancaironline.net Mailing List Archive

I strongly suggest you contact them and confirm that they will back up their warranty when on a rotary before shelling out the cash. You might also ask about installing it on an aircraft... they'll probably $%^& a brick at the very mention of that. Spintech was the only company I found that didn't have a problem with aircraft installations. They also custom built the 321 alloy muffler that Tracy ran for a very long time. It is a heavier muffler, but is about the only thing that has ever lasted very long behind a rotary in aircraft duty. Mike C.

----- Original Message -----

From: Mark R Steitle

To: Rotary motors in aircraft

Sent: Thursday, April 21, 2005 3:55 PM

Subject: [FlyRotary] Aeroturbine muffler

OK, while Ed is waiting for his side housings to arrive I thought I would ask if anyone has heard, or tried this muffler. Here is a snip from their description of the truck/SUV muffler model 3030, which has a 3’ inlet/outlet. They also make 2.5”, 3.5”, 4” and 5” inlet/outlet models. It comes with a lifetime warranty <big grin>. It looks to be very streamlined, made of SS, lightweight, and has no packing. It sells for less than $200 (except for the 5” model). This looks like this just might be what I’ve been looking for. More info available at http://www.pickupspecialties.com/Aero_Turbine/aeroturbine_mufflers.htm. Comments???

Mark S.

(I have no affiliation with this company)

The AT3030 is completely stainless steel inside and out. There is no packing or moisture collecting material in the muffler. The hand-polished stainless steel AT3030 will give you the look and feel that you want and the performance you deserve. The Aeroturbine Lifetime Warranty will guarantee that your investment is still performing as long as you own your vehicle.