Got the new rotors today - first
time I've ever seen a new rotor - the are bright metallic {:>).
The
depth of the apex seal slot on the new rotors ranged from 9.65mm to
9.77 mm. Interestingly the width of the bottom of the apex slot was
1.88mm but the top was narrower at 1.778mm. I noticed that the lip of
the apex seal slot had a tiny burr of metal along it as if they were
not using a sharp enough tool or else pushing it along too fast. Or
perhaps no one took the time to deburr the slot.
Just in case any of you ever wonder
whether you are looking at a 9.7:1 rotor or some other rotor, there is
a fairly easy way to tell. Lay a straight edge across the depression
in the rotor and measure from its bottom to the center of the
depression, it should measure right at 4 mm. The 9.1 measure around
7mm for comparison. Just thought you might want to know.
Ed