|
|
Does anyone know what Bruce Turrentine changed between his first and second edition?
Barry Gardner (proud owner of a 1st edition video but about to dig into his engine and wondering what Bruce revised...)
Wheaton, IL
Dean wrote:
Ed
We certainly appreciate your efforts in generating this transcript. I have Bruce's 2nd edition video. Perhaps I am the only one having this problem in printing it out. The first 3 pages print out OK. After that, there are a number of single lines that are individually underlined with a dotted line. Each of those divider lines causes one line to be printed out on a full sheet of paper, which would require 40 sheets for the full transcript if I let the printer run. Best Regards
Dean Van Winkle
RV-9A Fuselage/Finish 13B/RD-1B/EC2/EM2
----- Original Message -----
*From:* Ed Anderson <mailto:eanderson@carolina.rr.com>
*To:* Rotary motors in aircraft <mailto:flyrotary@lancaironline.net>
*Sent:* Sunday, April 17, 2005 6:46 PM
*Subject:* [FlyRotary] 13B Overhaul Steps
Attached is a transcript of the video Bruce T made back a few
years ago (a newer version is out) for overhauling the 13B. I the
video quite useful as it answered lots of things not in the
workshop manuals. In any case, I had laptop in lap and sat in bed
several nights copying what Bruce was saying as a written
reference for out in the shop when working.
No assertion is make as to accuracy or spelling {:>), but you may
find it useful should you ever decide to tear into one.
Best Regards
Ed
Ed Anderson
Rv-6A N494BW Rotary Powered
Matthews, NC
eanderson@carolina.rr.com <mailto:eanderson@carolina.rr.com>
------------------------------------------------------------------------
>> Homepage: http://www.flyrotary.com/
>> Archive: http://lancaironline.net/lists/flyrotary/List.html
|
|