Received-SPF: pass
 receiver=logan.com; client-ip=209.86.89.67; envelope-from=jerryhey@earthlink.net
DomainKey-Signature: a=rsa-sha1; q=dns; c=simple;
  s=test1; d=earthlink.net;
  h=Date:Subject:Content-Type:Mime-Version:From:To:Content-Transfer-Encoding:In-Reply-To:Message-Id:X-Mailer;
  b=cLkJG6LEqsEJeSpnSQkYfbtoKru/ri3bVNmkLlZ55V4KoTqh6TorF9Q/F+UkEB4F;
Date: Mon, 18 Apr 2005 18:52:15 -0500
Subject: Re: [FlyRotary] Re: Intake plenum  HELP??
Content-Type: text/plain; delsp=yes; charset=US-ASCII; format=flowed
Mime-Version: 1.0 (Apple Message framework v552)
From: Jerry Hey <jerryhey@earthlink.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Content-Transfer-Encoding: 7bit
In-Reply-To: <list-882635@logan.com>
Message-Id: <E46CEC1A-B064-11D9-B071-0003931B0C7A@earthlink.net>

I don't follow you George.  The only restriction would be the flange on  
the air filter which is 2.375 i.d..  This is a BIG filter used on big  
block engines.   Jerry


On Monday, April 18, 2005, at 05:30 PM, George Lendich wrote:

> Jerry,
> That Plenum looks better, much better. Why the restriction in the  
> passages
> to the intake bellmouths - is that necessary?
> George (down under)
>
>> Here is a drawing of an intake for filtered ram air.  It will fit
>> inside a Tailwind Cowl.  I have not yet figured out how it goes
>> together and I am hoping the considerable brain power on this list  
>> will
>> come to my rescue. I need to be able to service (install/remove) the
>> air filter.  The air filter is hose clamped over the flange.     Jerry
>>
>
>
> ----------------------------------------------------------------------- 
> -----
> ----
>
>
>
>
>
>
> ----------------------------------------------------------------------- 
> -----
> ----
>
>
>>>>  Homepage:  http://www.flyrotary.com/
>>>>  Archive:   http://lancaironline.net/lists/flyrotary/List.html
>>
>
>
>
>>>  Homepage:  http://www.flyrotary.com/
>>>  Archive:   http://lancaironline.net/lists/flyrotary/List.html
>