Dean,  I downloaded the file and printed it without problem.  Of course, I have a Mac and  have not had a "problem" of any kind for at least three  years.   Jerry




On Monday, April 18, 2005, at 11:36 AM, Dean wrote:

Ed
 
We certainly appreciate your efforts in generating this transcript.  I have Bruce's 2nd edition video.  Perhaps I am the only one having this problem in printing it out.  The first 3 pages print out OK. After that, there are a number of single lines that are individually underlined with a dotted line.  Each of those divider lines causes one line to be printed out on a full sheet of paper, which would require 40 sheets for the full transcript if I let the printer run. 
 
Best Regards
Dean Van Winkle
RV-9A  Fuselage/Finish   13B/RD-1B/EC2/EM2

----- Original Message -----
From: Ed Anderson
To: Rotary motors in aircraft
Sent: Sunday, April 17, 2005 6:46 PM
Subject: [FlyRotary] 13B Overhaul Steps

Attached is a transcript of the video Bruce T  made back a few years ago (a newer version is out) for overhauling the 13B.  I the video quite useful as it answered lots of things not in the workshop manuals.  In any case, I had laptop in lap and sat in bed several nights copying what Bruce was saying as a written reference for out in the shop when working.
 
No assertion is make as to accuracy or spelling {:>), but you may find it useful should you ever decide to tear into one.
 
Best Regards
 
Ed
 
Ed Anderson
Rv-6A N494BW Rotary Powered
Matthews, NC
eanderson@carolina.rr.com

<image.tiff>

>>  Homepage:  http://www.flyrotary.com/
>>  Archive:   http://lancaironline.net/lists/flyrotary/List.html