|
|
George,
I downloaded it from Ed's original link, and it looks fine. I'm remote today, so I can't test its ability to print. Could you be using too old a version of Word? The properties show it was created by Word 2000. Dale R.
From: "Ed Anderson" <eanderson@carolina.rr.com>
Date: 2005/04/18 Mon AM 08:54:59 EDT
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Subject: [FlyRotary] Re: 13B Overhaul Steps
Ok, George
Copy to you off line
Ed
----- Original Message ----- From: George Lendich To: Rotary motors in aircraft Sent: Monday, April 18, 2005 3:46 AM
Subject: [FlyRotary] Re: 13B Overhaul Steps
Ed,
I tried to print that for a record but it seems to have been corrupted.
Do you think you could e-mail that doc to me direct.
TIA
George ( down under)
lendich@optusnet.com.au ----- Original Message ----- From: Ed Anderson To: Rotary motors in aircraft Sent: Monday, April 18, 2005 9:46 AM
Subject: [FlyRotary] 13B Overhaul Steps
Attached is a transcript of the video Bruce T made back a few years ago (a newer version is out) for overhauling the 13B. I the video quite useful as it answered lots of things not in the workshop manuals. In any case, I had laptop in lap and sat in bed several nights copying what Bruce was saying as a written reference for out in the shop when working.
No assertion is make as to accuracy or spelling {:>), but you may find it useful should you ever decide to tear into one.
Best Regards
Ed
Ed Anderson
Rv-6A N494BW Rotary Powered
Matthews, NC
eanderson@carolina.rr.com
----------------------------------------------------------------------------
>> Homepage: http://www.flyrotary.com/
>> Archive: http://lancaironline.net/lists/flyrotary/List.html
|
|