|
Jarrett,
Good looking cowl. So far only one other person has express
an interest.
Thanks,
Bobby
Bob Sorry to be sending this so long after your
original post, I'm a little bit behind but getting caught up.
A couple months ago I did a 3D model of an Rv-10
cowl [ see pic's attached] If you find that you can't get enough people
interested in these, I'd be glad to work with you on improving this layout to
fit what you. Also for the record I've mentioned it in the past, anyone wanting
some 3D help [ getting something mocked up to check fits etc] I'd be glad to
help, FREE.. I'm not doing this to make a buck or promote my business, I'd
just like to help. In helping you I hope to teach myself more about this great
engine and its use in regards to a/c.
Let me know.
Jarrett Johnson
Btw, this should be an accurate model as it was
produced off of acctual measurements for an Rv-10 firewall. I got the dim's off
of a post on Pauls list [ does that cover copyright's??] However the style
of mount and Rad locations may change depending on who looks at it or makes
requests.
----- Original Message -----
Sent: Tuesday, April 05, 2005 7:20
AM
Subject: [FlyRotary] RV10 Cowl
I am interested in
having James Aircraft design a RV10 cowl with a smaller frontal area and
proper ducting to support our rotary installations. They need a minimum of
five orders for the design. If anyone is interested please contact me and I
will have them place you on the list.
Thanks,
Bobby
Hughes
|