----- Original Message -----
Sent: Friday, February 04, 2005 5:33
PM
Subject: [FlyRotary] Re: Bad news- Moroso
Oil Pans for 13B
Greetings,
The UPS man
just stopped by, and I got my Moroso oil pan. It's a thing of beauty,
but unfortunately, it doesn't fit. These pans appear to be made for
the old first gen and earlier front covers, which were thicker
than the 2nd gen cover. In other words, the distance between the front
and rear holes on my engine (2nd gen cover) is about 13.75", and the distance
on the pan is about 14.5". Bummer.
You can use
a first gen cover, as long as you aren't using an engine mount plate that was
made for the 2nd gen front cover. I happen to know this well, because my
engine originally came with a first gen cover, and I traded it to Bruce for a
2nd gen so it would fit the CCI mount plate.
In other
news, the rotors are back from Performance Coatings. The coating is
beautiful, and I might add free. Brad felt bad about dropping
my new rotor, so he not only sent a check to pay for the rotor, but
didn't charge me for the coating of the other two. Boys and
Girls, this is first class, grade A customer service.
They also returned the bad rotor, and it really is toast. Talk
about a bad bounce... It hit right on the corner, so the apex seal is
squeezed, along with the corner seal, and even the side seal. Couldn't
possibly have hit worse. I'll post a pic if anyone actually cares to see
it.
Rusty
(T-Minus about half a day to
reassembly)