Mailing List flyrotary@lancaironline.net Message #15673
From: David Staten <Dastaten@earthlink.net>
Subject: Re: [FlyRotary] Re: Fuel Injector Sizing
Date: Fri, 21 Jan 2005 10:01:10 -0600
To: Rotary motors in aircraft <flyrotary@lancaironline.net>


kenpowell@comcast.net wrote:

 Lastly, at cruise altitudes the injector cycle rate decreases as the HP requirement decreases so at 8000 ft the duty cycle of the injectors will only be 60 % which is very safe for sustained operation. .   
At the risk of nitpicking, I think that the above comment should be clarified.... "For normally aspirated operations....". A turbocharged installation with an absolute pressure controller can hold a set manifold pressure up to its critical altitude... if MP and fuel flow requirements remain the same (and not changing due to altitude) then the duty cycle will remain the same as well.
 
Dave Staten
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster