Return-Path: Received: from [24.25.9.102] (HELO ms-smtp-03-eri0.southeast.rr.com) by logan.com (CommuniGate Pro SMTP 4.2.5) with ESMTP id 538854 for flyrotary@lancaironline.net; Fri, 19 Nov 2004 11:43:18 -0500 Received-SPF: none receiver=logan.com; client-ip=24.25.9.102; envelope-from=eanderson@carolina.rr.com Received: from edward2 (cpe-069-132-109-019.carolina.rr.com [69.132.109.19]) by ms-smtp-03-eri0.southeast.rr.com (8.12.10/8.12.7) with SMTP id iAJGgkkd015781 for ; Fri, 19 Nov 2004 11:42:47 -0500 (EST) Message-ID: <002701c4ce56$ce3f22d0$2402a8c0@edward2> From: "Ed Anderson" To: "Rotary motors in aircraft" References: Subject: Re: [FlyRotary] Re: Coil Connector Pins Date: Fri, 19 Nov 2004 11:42:49 -0500 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0024_01C4CE2C.E5395840" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2800.1106 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1106 X-Virus-Scanned: Symantec AntiVirus Scan Engine This is a multi-part message in MIME format. ------=_NextPart_000_0024_01C4CE2C.E5395840 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Ok, Mark, They are own their way to you Ed ----- Original Message -----=20 From: Mark Steitle=20 To: Rotary motors in aircraft=20 Sent: Friday, November 19, 2004 9:35 AM Subject: [FlyRotary] Re: Coil Connector Pins Ed, Well, I checked my coil connectors and couldn't see any little ribbed = red rubber thingies. It has one big blue ribbed seal around the outside = that seals the entire plug in the hole, and another on the backside that = all four wires go through. So, don't bother sending the little seals. = If the pins are different and I can't use them, I'll return them to you. = =20 Thanks, Mark At 11:31 AM 11/18/2004 -0600, you wrote: Ed, I'll have to check tonight after work. I didn't see any little red = ribbed thingies in the connector, but I'll look again to be sure. I'll = email you first thing in the morning with my findings. =20 Thanks, Mark At 12:14 PM 11/18/2004 -0500, you wrote: Your welcome, Mark =20 Will get them out to you tomorrow. I got "sidetracked" by the = conversion to the 2.85 and 76x88 prop so have not actually wired my LS1 = plugs yet. I intend to crimp - and perhaps solder. You must crimp (at = least the rear part of the pin) the pin to get it to clamp the socket = seal (little multi ribbed red rubber thing) frimly around the wire. So = it appears (without having actually tried it yet) that you would - if = soldering, need to solder the first part of the pin to the wire but = leave the "arms" of the rear of the pin free to crimp around the red = seal - just my opinion at this point since I have not tried it. =20 Do you feel you need any of the red seals? =20 Ed =20 ----- Original Message -----=20 From: Mark Steitle=20 To: Rotary motors in aircraft=20 Sent: Thursday, November 18, 2004 11:46 AM=20 Subject: [FlyRotary] Re: Coil Connector Pins Ed,=20 Appreciate your generosity. Yes, these are the female pins. = Since you've been through this exercise, is there anything that you can = share on getting these little buggers out of the connector? Maybe a = "special tool" that I can fabricate to make the process a little easier? = I assume that you soldered the wires to the pins? =20 Thanks, =20 Mark=20 24 Carriage House Ln=20 Austin, TX 78737 At 11:27 AM 11/18/2004 -0500, you wrote: Yes, Mark. I received a quantity of 50 pins and certainly = will not use that=20 many (hopefully {:>)). I believe you are correct about the = disassembly as=20 the parts for the plug do come unassembled. Of course that = does not=20 necessarily mean they were designed to be disassembled - but = one can try.=20 {:>) From looking at the component pieces, you may also need the = individual pin=20 seals (red/orange rubber ribbed), they appear to be clamped by = the tail of=20 the pin so removing the old pin could find the seals = damaged/compressed. I=20 have 100 of those, so let me know if you need any. Give me your snail mail address and I will try to get 26 pins = out by=20 tomorrow. These are the female pins that go into the plugs = that slip over=20 the 4 coil terminal pins in the recessed part of the coil. Ed Anderson=20 ----- Original Message -----=20 From: "Mark Steitle" =20 To: "Rotary motors in aircraft" =20 Sent: Thursday, November 18, 2004 10:57 AM=20 Subject: [FlyRotary] Coil Connector Pins > [Message intended for Ed Anderson]=20 >=20 > Ed,=20 > Do you have any of those LS1 coil connector pins left over = that I could=20 buy=20 > from you. I would like to re-wire my connectors to tidy = things up. I=20 > looked at my connectors and it appears that the plug can be = disassembled=20 > and new pins installed. If you can spare them, I would need = about 24,=20 plus=20 > a couple for attrition.=20 >=20 > Thanks,=20 > Mark S.=20 >=20 >=20 >=20 > >> Homepage: http://www.flyrotary.com/=20 > >> Archive: = http://lancaironline.net/lists/flyrotary/List.html=20 > >> Homepage: http://www.flyrotary.com/=20 >> Archive: = http://lancaironline.net/lists/flyrotary/List.html ------=_NextPart_000_0024_01C4CE2C.E5395840 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Ok, Mark,
 
They are own their way to = you
 
Ed
----- Original Message -----
From:=20 Mark=20 Steitle
Sent: Friday, November 19, 2004 = 9:35=20 AM
Subject: [FlyRotary] Re: Coil = Connector=20 Pins

Ed,
Well, I checked my coil = connectors and=20 couldn't see any little ribbed red rubber thingies.  It has one = big blue=20 ribbed seal around the outside that seals the entire plug in the hole, = and=20 another on the backside that all four wires go through.  So, = don't bother=20 sending the little seals.  If the pins are different and I can't = use=20 them, I'll return them to you.  =

Thanks,
Mark

 At=20 11:31 AM 11/18/2004 -0600, you wrote:
Ed,
I'll have to = check tonight=20 after work.  I didn't see any little red ribbed thingies in the = connector, but I'll look again to be sure.  I'll email you = first thing=20 in the morning with my findings.  =

Thanks,
Mark

 =20 At 12:14 PM 11/18/2004 -0500, you wrote:
Your=20 welcome, Mark
 
Will get them out to you tomorrow.  I got = "sidetracked" by the=20 conversion to the 2.85 and 76x88 prop so have not actually wired = my LS1=20 plugs yet.  I intend to crimp - and perhaps solder.  You = must=20 crimp (at least the rear part of the pin) the pin to get it to = clamp the=20 socket seal (little multi ribbed red rubber thing) frimly around = the=20 wire.  So it appears (without having actually tried it yet) = that you=20 would - if soldering, need to solder the first part of the pin to = the wire=20 but leave the "arms" of the rear of the pin free to crimp around = the red=20 seal - just my opinion at this point since I have not tried=20 it.
 
Do you=20 feel you need any of the red seals?
 
Ed
 =20
----- Original Message -----=20
From: Mark = Steitle=20
To: Rotary = motors in=20 aircraft=20
Sent: Thursday, November 18, 2004 11:46 AM=20
Subject: [FlyRotary] Re: Coil Connector Pins

Ed,=20
Appreciate your generosity.  Yes, these are the female=20 pins.  Since you've been through this exercise, is there = anything=20 that you can share on getting these little buggers out of the=20 connector?  Maybe a "special tool" that I can fabricate to = make the=20 process a little easier?  I assume that you soldered the = wires to=20 the pins? 

Thanks, =20
Mark=20
24 Carriage House Ln=20
Austin, TX  78737





 At 11:27 AM 11/18/2004 -0500, you wrote:
Yes, Mark.  I received a quantity of 50 pins and = certainly=20 will not use that=20
many (hopefully {:>)).  I believe you are correct = about=20 the disassembly as=20
the parts for the plug do come unassembled.  Of = course that=20 does not=20
necessarily mean they were designed to be disassembled - = but one=20 can try.=20
{:>)

 From looking at the component pieces, you may also = need the=20 individual pin=20
seals (red/orange rubber ribbed), they appear to be = clamped by the=20 tail of=20
the pin so removing the old pin could find the seals=20 damaged/compressed.  I=20
have 100 of those, so let me know if you need any.

Give me your snail mail address and I will try to get 26=20 pins  out by=20
tomorrow. These are the female pins that go into the = plugs =20 that slip over=20
the 4 coil terminal pins in the recessed part of the = coil.

Ed Anderson=20
----- Original Message -----=20
From: "Mark Steitle" <msteitle@mail.utexas.edu>=20
To: "Rotary motors in aircraft"=20 <flyrotary@lancaironline.net>=20
Sent: Thursday, November 18, 2004 10:57 AM=20
Subject: [FlyRotary] Coil Connector = Pins





> [Message intended for Ed Anderson]=20
>=20
> Ed,=20
> Do you have any of those LS1 coil connector pins left = over=20 that I could=20
buy=20
> from you.  I would like to re-wire my connectors = to tidy=20 things up.  I=20
> looked at my connectors and it appears that the plug = can be=20 disassembled=20
> and new pins installed.  If you can spare them, = I would=20 need about 24,=20
plus=20
> a couple for attrition.=20
>=20
> Thanks,=20
> Mark S.=20
>=20
>=20
>=20
> >>  Homepage:  http://www.flyrotary.com/=20
> >>  Archive:   http://lancaironline.net/lists/flyrotary/List.html= =20
>







>>  Homepage:  http://www.flyrotary.com/=20
>>  Archive:   http://lancaironline.net/lists/flyrotary/List.html= =20 =
------=_NextPart_000_0024_01C4CE2C.E5395840--