|
|
Does anybody have two EGT sensors, how they
are mounted and where do you get them?
Hi Buly,
The EM2 manual explains how to make your own thermocouples from thermocouple
wire. The EGT sensor I have came with a Westach instrument, but basically
it's just a thermocouple wire hooked to a bolt (probe) which is held in the
exhaust stream by a clamp around the exhaust pipe with a hole for the bolt.
I'm not sure where you could put a second sensor in a turbo installation
unless you drilled the cast manifold. I added a second sensor on the turbo
heat shield.
John
|
|