Return-Path: Received: from imf19aec.mail.bellsouth.net ([205.152.59.67] verified) by logan.com (CommuniGate Pro SMTP 4.2.4) with ESMTP id 455546 for flyrotary@lancaironline.net; Wed, 06 Oct 2004 19:24:50 -0400 Received-SPF: pass receiver=logan.com; client-ip=205.152.59.67; envelope-from=atlasyts@bellsouth.net Received: from [65.11.43.108] by imf19aec.mail.bellsouth.net (InterMail vM.5.01.06.11 201-253-122-130-111-20040605) with ESMTP id <20041006232404.SDVE1786.imf19aec.mail.bellsouth.net@[65.11.43.108]> for ; Wed, 6 Oct 2004 19:24:04 -0400 User-Agent: Microsoft-Entourage/10.1.4.030702.0 Date: Wed, 06 Oct 2004 19:23:43 -0400 Subject: Re: [FlyRotary] Re: LS-1 coil boots From: Bulent Aliev To: Rotary motors in aircraft Message-ID: In-Reply-To: Mime-version: 1.0 Content-type: multipart/alternative; boundary="B_3179935426_2846048" > This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. --B_3179935426_2846048 Content-type: text/plain; charset="ISO-8859-1" Content-transfer-encoding: quoted-printable On 10/6/04 6:42 PM, "Al Gietzen" wrote: > Subject: [FlyRotary] LS-1 coil boots > =20 >=20 >=20 > Does anybody have crimping instructions for the LS-1 coil boots. I have a= set > of rubber boots and the metal connectors. > I know how to crimp the wires, but the other end that slips over the coil= pin, > is half open? How do you wrap it to size? > Bulent=20 > =20 > I=B9m not sure what you mean by =8Chalf open=B9; but I recall having to go dire= ct to > MSD for the connectors; the ones that can with the wires were not correct= . > They sent them for no charge. > =20 > Al >=20 Thanks Al, I realized I was assuming the open end was going into the coil. After I had the coil in front of me I got it right. Crimped the wires and everything is OK. bulent --B_3179935426_2846048 Content-type: text/html; charset="ISO-8859-1" Content-transfer-encoding: quoted-printable Re: [FlyRotary] Re: LS-1 coil boots On 10/6/04 6:42 PM, &qu= ot;Al Gietzen" <ALVentures@cox.net> wrote:

Subject: [FlyRotary] LS-1 coil boots


Does anybody have crimping instructions for the LS-1 coil boots. I have a s= et of rubber boots and the metal connectors.
I know how to crimp the wires, but the other end that slips over the coil p= in, is half open? How do you wrap it to size?
Bulent

I’m not sure what you mean by ‘half open’; but I recall h= aving to go direct to MSD for the connectors; the ones that can with the wir= es were not correct.  They sent them for no charge.
 
Al


Thanks Al, I realized I was assuming the open end was going into the coil. = After I had the coil in front of me I got it right.
Crimped the wires and everything is OK.
bulent
 --B_3179935426_2846048--