|
|
It just occured to me that your installation is probably not Plugs Up.
No, it's not, Ed. At least not till I try my first 90 degree steep turn :)
However, one approach is to connect the primary to primary pipe and
secondary to secondary pipe using two 1/2 circle connector pipes. The bend
radius for the connectors would of course need to be such that their ends
covered the appropriate intake tubes. The smaller radius bend connector
pipe on the inside for the primaries and the larger radius bend
pipe on the outside (or top of the primary connector) for the secondaires.
This sounds good, but I don't know enough about these systems to understand
what you're describing. Got any pictures?
Regards,
John
|
|