Return-Path: Received: from mtiwmhc11.worldnet.att.net ([204.127.131.115] verified) by logan.com (CommuniGate Pro SMTP 4.2) with ESMTP id 356501 for flyrotary@lancaironline.net; Sun, 08 Aug 2004 01:33:00 -0400 Received-SPF: none receiver=logan.com; client-ip=204.127.131.115; envelope-from=keltro@att.net Received: from 204.127.135.59 ([204.127.135.59]) by worldnet.att.net (mtiwmhc11) with SMTP id <2004080805321911100444sre>; Sun, 8 Aug 2004 05:32:29 +0000 Received: from [209.247.222.107] by 204.127.135.59; Sun, 08 Aug 2004 05:32:18 +0000 From: keltro@att.net (Kelly Troyer) To: "Rotary motors in aircraft" Subject: Re: [FlyRotary] Milestone - 20B runs on the airplane Date: Sun, 08 Aug 2004 05:32:18 +0000 Message-Id: <080820040532.1387.4115BAE2000402B20000056B2160280651019D9B040A05@att.net> X-Mailer: AT&T Message Center Version 1 (Jul 19 2004) X-Authenticated-Sender: a2VsdHJvQGF0dC5uZXQ= MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="NextPart_Webmail_9m3u9jl4l_1387_1091943138_0" --NextPart_Webmail_9m3u9jl4l_1387_1091943138_0 Content-Type: text/plain Content-Transfer-Encoding: 8bit Al, Congrats! I have been told it is almost akin to giving birth to men when we hear the first sounds of life from our carefully crafted machines. -- Kelly Troyer Dyke Delta/13B/RD1C/EC2 -------------- Original message from "Al Gietzen" : -------------- Ah-h-h; at last the smell of fuel and exhaust instead of epoxy. One milestone in an airplane building project like this is running the engine on the plane for the first time. I was able to do that today. It was successful; and quite short. The reason for its brevity was the loss of use of the EM-2 engine monitor. This happened before the run – the display was dead the second time I turned it on for reasons yet to be determined. After some checks, and a couple calls to Tracy, we agreed there were no further checks I could effectively do, so it and the connecting cable is removed and packed for shipment to RWS. I chose to proceed with a brief run anyway just to see that everything needed for engine operation was functional. The engine fired off promptly and ran just above idle just long enough for oil and coolant to flow and get detectably warm. After checking everything out, there were no leaks, and I knew oil was flowing by the slight warmth of the filters and cooler. I fired it up again, adjusted mixture a bit, ran for a bit, added a bit of throttle a couple of times, and shutdown. This time I could also verify warm coolant flow throughout the system, and all air bled out of both radiators. Very nice. Disappointed there will be no more runs until I have a functional engine monitoring system – delighted that everything else was just fine! How does I sound? POWERFULL! Al --NextPart_Webmail_9m3u9jl4l_1387_1091943138_0 Content-Type: text/html Content-Transfer-Encoding: 8bit

Al,

  Congrats! I have been told it is almost akin to giving birth to men when

we hear  the first sounds of life from our carefully crafted machines.

 

--
Kelly Troyer
Dyke Delta/13B/RD1C/EC2




-------------- Original message from "Al Gietzen" : --------------

Ah-h-h; at last the smell of fuel and exhaust instead of epoxy.  One milestone in an airplane building project like this is running the engine on the plane for the first time.  I was able to do that today.  It was successful; and quite short.

 

The reason for its brevity was the loss of use of the EM-2 engine monitor.  This happened before the run – the display was dead the second time I turned it on for reasons yet to be determined.  After some checks, and a couple calls to Tracy, we agreed there were no further checks I could effectively do, so it and the connecting cable is removed and packed for shipment to RWS.

 

I chose to proceed with a brief run anyway just to see that everything needed for engine operation was functional.  The engine fired off promptly and ran just above idle just long enough for oil and coolant to flow and get detectably warm.  After checking everything out, there were no leaks, and I knew oil was flowing by the slight warmth of the filters and cooler.  I fired it up again, adjusted mixture a bit, ran for a bit, added a bit of throttle a couple of times, and shutdown.  This time I could also verify warm coolant flow throughout the system, and all air bled out of both radiators.  Very nice.

 

Disappointed there will be no more runs until I have a functional engine monitoring system – delighted that everything else was just fine!

 

How does I sound? POWERFULL!

 

Al

--NextPart_Webmail_9m3u9jl4l_1387_1091943138_0--