Message-ID: <3A234351.7626537D@nii.net>
Date: Tue, 28 Nov 2000 00:32:01 -0500
From: "Angier M. Ames" <alphadog@nii.net>
Reply-To: alphadog@nii.net
Reply-To: lancair.list@olsusa.com
Organization: Alpha Delta Research
To: lancair.list@olsusa.com
Subject: Re: 360 MKII horizontal stab
References: <20001127052956.AAA7119@ns1.olsusa.com>
Mime-Version: 1.0

          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> 
>>
Hi Again,

Have one of you recently completed installation of your horizontal stabilizer? Three
years ago I finished preparation of the horizontal stab fillets which included setting
the stab incidence. Now that I'm ready to bond the stab in place, I'd like to double
check all my measurements first!!...but confusion reigns supreme.

The BL50 Rib pattern has a level line but this line does not seem to correspond to the
wing chord at BL50. So the question is this, should the horizontal stab chord be set:
-1/2 to -1 degree relative to the wing BL50 level line or, relative to the actual chord
of the wing at BL50? There is a substantial difference between these two lines.

Thanks,

Angier Ames

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>