Sender: <marv@lancaironline.net>
To:  lml@lancaironline.net
Date: Wed, 26 Mar 2014 07:43:35 -0400
Message-ID: <redirect-6800520@logan.com>
Received-SPF: pass
 receiver=logan.com; client-ip=107.14.166.228; envelope-from=kkellner1@new.rr.com
From: "Ken" <kkellner1@new.rr.com>
References: <redirect-6795891@logan.com>
Subject: Re: TSIO 550 temp sensors
MIME-Version: 1.0
Content-Type: text/plain;
	format=flowed;
	charset="iso-8859-1";
	reply-type=original
Content-Transfer-Encoding: 7bit

Check the bayonet temperature probe.  Mine came loose and slide out an inch 
causing all kinds of goofy readings.

Ken Kellner
IV-P 14LK
920-858-7535

----- Original Message ----- 
From: "John Barrett" <2thman1@gmail.com>
To: <lml@lancaironline.net>
Sent: Tuesday, March 25, 2014 10:46 AM
Subject: TSIO 550 temp sensors


I am having temp output discrepancies from one of the TIT sensors so am 
considering getting a replacement sensor to see if that fixes it. The turbos 
are Garrett's.

As of last few flights, oil temp feedback is also going sideways.  It's 
normal during run up and first part of the flight but at cruise it 
intermittently drops down in to the red arc as low as 40 or 50  degrees and 
jumps around from there to actual temps.  The problem could be in the wiring 
or could be the sensor itself.  If the part is not too expensive I would 
just purchase and install while looking for the cause.  Same is true for the 
TIT probe.

Can anyone tell me where to purchase and what parts to order?

Thanks,
John
31VP


Sent from my iPad