Mailing List lml@lancaironline.net Message #69543
From: Jack Morgan <jmorgan1023@comcast.net>
Sender: <marv@lancaironline.net>
Subject: Seat extensions
Date: Sun, 23 Mar 2014 15:13:37 -0400
To: <lml@lancaironline.net>
 Message Header

Undecoded Message
Hi Dave,

My IVP came with the new seats. They required an extended rear support made of bakelite and put in with carbon fiber. Suggest you contact Lancair for the latest drawing. I should be able to find the drawing if you run into trouble.

Jack Morgan

On Mar 22, 2014, at 6:02 AM, Lancair Mailing List <lml@lancaironline.net> wrote:

To: lml@lancaironline.net
Date: Thu, 20 Mar 2014 07:54:09 -0400
From: skinner3410@sbcglobal.net
Subject: [LML] Need to move front seats aft on a IV-P

Has anyone with a IV-P found a good way to move the front seats aft about 3-4 inches?  I don't need the rear seat leg room, but I could use more in the front.  Moving the rails rearward would cantilever them quite a ways behind the spar box.  I haven't figured out how I would support the rear ends of the rails.
 
Dave Skinner
845CM

Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster