dave
remove the seat and see how it is attached.
some seats were attached only to the spar; but the kits called for a cantilever to the rear.
you may not have the cantilever; although, if i remember correctly, the previous user, was over six feet tall.
possible:
1. increase cantilever
2. move seat rail attachments
3. thinner seat cushions (use temprafoam)
good luck
how did you make out with the fuel pump issue?
peter
To: lml@lancaironline.net
Date: Thu, 20 Mar 2014 07:54:09 -0400
From: skinner3410@sbcglobal.net
Subject: [LML] Need to move front seats aft on a IV-P
Has anyone with a IV-P found a good way to move the front seats aft about 3-4 inches? I don't need the rear seat leg room, but I could use more in the front. Moving the rails rearward would cantilever them quite a ways behind the spar box. I haven't figured out how I would support the rear ends of the rails.
Dave Skinner
845CM